All Categories

News & Blog

Home >  News & Blog

ICEMA 3-Ton Freshwater Flake Ice Machine: Ice-Making Process and Product Features

Nov 16, 2026

ICEMA is preparing a BMF30 freshwater flake ice machine for a customer in Ecuador. The machine has a designed production capacity of 3,000 kg per 24 hours and uses a Copeland compressor, R404A refrigerant, and an air-cooled refrigeration system.

image1.jpg

Freshwater flake ice is widely used in seafood preservation, food processing, and other cooling applications. Its thin, irregular shape allows ice to spread easily around products, providing direct contact for cooling.

This article introduces the main features, ice-making process, and manufacturing details of the BMF30 flake ice machine.

1. BMF30 Freshwater Flake Ice Machine

The BMF30 is designed to produce 3 tons of freshwater flake ice per day. This machine is configured for a 220V, 60Hz single-phase power supply, making it suitable for installation sites with compatible single-phase electricity.

The machine also includes an ice storage bin to collect and temporarily store the ice produced during operation.

Unlike block ice machines, which require longer freezing cycles, flake ice machines produce thin ice flakes continuously. This allows users to collect ice directly without a separate crushing process.

2. How Does the Flake Ice Machine Work?

The ice-making process is simple.

First, freshwater enters the machine through the water inlet and flows through the water distribution system onto the evaporator surface.

The refrigeration system uses the Copeland compressor and R404A refrigerant to cool the evaporator. As the evaporator surface becomes cold, the water gradually freezes into a thin layer of ice.

image2.jpg

A rotating ice blade then scrapes the ice from the evaporator surface, breaking it into small flakes. These ice flakes fall directly into the storage bin below.

This process repeats continuously, allowing the machine to produce flake ice during normal operation.

The actual ice output may vary depending on ambient temperature, inlet water temperature, and other operating conditions.

3. Air-Cooled Refrigeration System

The BMF30 uses an air-cooled condenser to release heat from the refrigeration system.

During operation, fans move air across the condenser to remove heat. Compared with water-cooled systems, this design does not require a separate cooling tower or an external condenser cooling-water circuit.

However, proper ventilation is important. The machine should be installed in a well-ventilated area with enough space around the air inlet and outlet.

Good airflow helps the condenser release heat and supports normal refrigeration performance.

4. Manufacturing and Quality Inspection

The performance of a flake ice machine depends on the proper assembly and operation of its main components.

During manufacturing, ICEMA focuses on several important inspection points:

· Component assembly: Check the installation of the compressor, condenser, refrigeration pipes, and other main components.

· Refrigeration system: Inspect pipe connections and perform necessary leak checks.

· Electrical system: Check wiring, electrical protection devices, and control connections.

· Ice-making mechanism: Check water distribution and the operation of the rotating ice blade.

· Final inspection: Examine the machine's exterior, panels, and overall assembly quality.

These inspections help identify potential problems before delivery.

For this Ecuador order, particular attention is given to product quality and exterior appearance. The machine is scheduled for delivery on November 15, 2026.

5. Applications of Freshwater Flake Ice

Flake ice has a relatively large contact area and can spread easily around products. This makes it useful for applications requiring direct cooling.

image3.jpg

In seafood preservation, flake ice can cover fish and other seafood products to help maintain low temperatures. In food processing, it can be used in cooling and temperature-control processes.

Since the ice is produced in small, thin flakes, it can be collected and used without additional crushing.

For businesses that need a regular supply of loose ice, the BMF30 provides a practical freshwater flake ice production solution.

Conclusion

The ICEMA BMF30 freshwater flake ice machine combines a 3,000 kg/day production capacity with a Copeland compressor, R404A refrigerant, and an air-cooled refrigeration system.

Its continuous ice-making process, rotating ice blade, and ice storage bin support convenient production and ice collection.

Through careful component assembly and quality inspection, ICEMA focuses on providing freshwater flake ice machines that meet specified technical requirements and practical operating needs.

Email WhatsApp Inquiry
×

GET IN TOUCH

This field is required